Introduction to Segmented Woodturning, Part II
Part II in our series on Segmented Woodturning – which was put together by Jim Whattam and Scott Whishart – is now available on our YouTube channel. In Part II, Jim builds on the skills covered in Part I by designing and building a fully segmented bowl, shown in the photo above. There will be particular emphasis on fence adjustments to get accurate segment lengths and techniques for gluing-up stacks of rings to obtain accurate joint alignment.
Also, a detailed guide that covers everything Jim presents during the demo is available as a free download in PDF format!
Download the free guide here.
If you enjoy our content and programming, please consider supporting us by becoming a member…